Zhengzhou Xinrunt Environmental Protection Technology Co

Detachable plate heat exchanger factory direct sales
Detachable plate heat exchanger is a kind of heat exchange equipment with high heat transfer efficiency, compact structure and simple maintenance. It has been widely used in heating, air conditioning, water supply and drainage, metallurgy and chemical industry video Petroleum machinery and other industries have become the first choice for designers and plate heat exchange users. The series plate heat exchanger consists of a set of corrugated metal plates and sealing pads, compression plates, guide rods, clamping bolt columns and pipes. The angled plate heat exchanger with four corners on the plate is composed of a set of corrugated metal plates, sealing pads, compression plates, guide rods, clamping bolt columns and pipes. There are corner holes in the four corners of the plate for the two fluids for heat transfer to pass through. The metal plate is installed in a frame composed of a fixed plate and a movable compression plate and tightened with clamping bolts. Sealing gaskets are installed on the plate to seal the fluid channels and guide the fluid to flow alternately into the respective channels. The corrugated plate not only increases the degree of turbulence but also forms many support points that are sufficient to withstand the pressure difference of the medium. Performance characteristics of plate heat exchanger The heat exchanger has high efficiency. The corrugation size is scientific and reasonable. The low Reynolds coefficient of the medium can make the medium form sufficient turbulence at low flow rate and reduce the possibility of fouling. The high value of the heat transfer coefficient can reach ~/. Compact structure, easy to disassemble and wash. Under the same industrial and mining conditions, the space occupied by the plate heat exchanger is only /~/ that of the tube heat exchanger. When disassembling and cleaning, loosen the clamping screw and disassemble and assemble within the original space. There is no need to reserve a large space for maintenance. The heat exchange area can be increased or decreased. The plates of the plate heat exchanger are independent units, and the heat exchange area can be increased or decreased as required. The process combination is flexible, so that it can adapt to changes in usage requirements. The plate row has a long service life, safe and reliable operation. The non-simultaneous mold closing process is used during the plate stroke to ensure that the tensile corrugation dimensions of the plate structure are precise and the corrosion resistance and structural strength of each part of the plate are uniform. At the same time, the sealing gasket is deformed when the plates are tightened. After small assembly and maintenance, the gasket seals reliably and the heat exchange medium has no internal leakage. The sealing gasket ages slowly and has a long service life. The operation is safe and reliable. Low cost and low investment. Due to the high heat transfer coefficient of the plate heat exchanger, the plate heat exchanger only requires the area of the tubular heat exchanger under the same heat exchange efficiency and the cost is significantly reduced. At the same time, the plate heat exchanger occupies less space and uses less cooling water, which means that equipment investment, power consumption and other costs are greatly reduced.